YESIDO VC12 Portable Air Pump – 7800mAh, 150psi, 5 Modes, USB-A Power Bank

The YESIDO VC12 is a cordless electric air pump with a 7800mAh battery (3×2600mAh 18650 cells), an 11V/100W metal 19-cylinder motor, a maximum pressure of 150psi and five preset inflation modes with automatic pressure cutoff. Charging: 9V/2A (approx. 2 hours) or 5V/2A (approx. 4 hours). Power bank output: USB-A 5V/2A. Air hose: 350mm. Three LED light modes: constant, SOS signal and flashing warning. No certifications listed. Colour: Black. Includes air pump, air hose, short and long FA adapter, ball needle, storage bag, P3 device cable and English manual. Curated by Aetheo for portable inflation.

Why you'll like it

• 7800mAh battery — cordless operation without a mains power source
• 5 preset inflation modes — Free, Car, Motorcycle, Bicycle and Ball with auto-stop at target pressure
• 150psi maximum — covers car, motorcycle, bicycle and sports ball inflation
• USB-A power bank output — 5V/2A device charging from the pump battery
• Three LED light modes — constant, SOS signal and flashing warning for roadside use

Designed for portable inflation

The VC12 runs from a 7800mAh lithium battery — three 18650 cells providing cordless operation away from a mains supply. The 11V/100W metal 19-cylinder motor drives inflation at up to 150psi. Five preset modes (Free, Car, Motorcycle, Bicycle, Ball) allow the operator to set a target pressure; the pump cuts off automatically when that pressure is reached, preventing over-inflation. USB-A 5V/2A output allows the pump battery to charge phones or other devices when not in use for inflation. Three LED light modes — constant illumination, SOS signal and flashing warning — are available for roadside use or low-light conditions. The 350mm air hose connects to the included adapters for different valve types. Curated by Aetheo for portable inflation.

Key features

7800mAh battery — 3×2600mAh 18650 cells

The VC12 uses three 2600mAh 18650 lithium cells totalling 7800mAh. This provides cordless operation for multiple inflation sessions without a mains power source. The battery charges at 9V/2A (approximately 2 hours from empty) or 5V/2A (approximately 4 hours from empty). Specific inflation count per charge varies by tyre size and starting pressure and is not stated in source documentation.

5 preset inflation modes — auto-stop

Five preset modes correspond to common inflation targets: Free (manual pressure setting), Car, Motorcycle, Bicycle and Ball. In Car, Motorcycle, Bicycle and Ball modes, the operator selects a target pressure and the pump stops automatically when that pressure is reached. The Free mode allows manual control without a preset target. Default preset pressures for each mode are set to typical values for those use cases; specific default pressures are not listed in source documentation.

11V/100W motor — 150psi maximum, 350mm air hose

The metal 19-cylinder motor operates at 11V/100W, rated to a maximum working pressure of 150psi. This covers standard car tyre, motorcycle tyre, bicycle tyre and sports ball inflation ranges. The 350mm air hose connects the pump to valves via the included short and long FA adapters and ball needle. Noise level is stated at ≥85dB during operation — this is a working compressor and will be audible.

USB-A power bank — 5V/2A output

The VC12 includes a USB-A output at 5V/2A (10W), allowing the pump's 7800mAh battery to charge smartphones, tablets or other USB devices when not in use for inflation. This is a supplementary power bank function — the pump battery serves dual purpose as an emergency charging source. The USB-A output is not for charging the pump itself; pump charging uses the P3 device cable (included).

Three LED light modes

An LED light on the VC12 operates in three modes: constant illumination (for working in low-light conditions), SOS signal (flashing Morse SOS pattern for emergency signalling) and flashing warning (for roadside visibility). The light is independently selectable from the pump's inflation functions.

Best for

• Car, motorcycle or bicycle tyre inflation away from a mains power supply
• Sports ball inflation where precise preset pressure auto-stop is useful
• Roadside emergency use where the SOS or warning light modes are needed
• Those who want a USB-A power bank function built into their pump
• Portable inflation across multiple vehicle types from one device

What's included

• 1 × YESIDO VC12 Air Pump
• 1 × Air Hose (350mm)
• 1 × Short FA Adapter
• 1 × Long FA Adapter
• 1 × Ball Needle
• 1 × Storage Bag
• 1 × P3 Device Cable (for pump charging)
• 1 × English Manual

Compatibility and setup

Battery: 7800mAh (3×2600mAh 18650 lithium, 3C). Motor: 11V/100W, metal 19-cylinde